4nagios自定义监测脚本-创新互联
这里举几个例子。
让客户满意是我们工作的目标,不断超越客户的期望值来自于我们对这个行业的热爱。我们立志把好的技术通过有效、简单的方式提供给客户,将通过不懈努力成为客户在信息化领域值得信任、有价值的长期合作伙伴,公司提供的服务项目有:空间域名、网站空间、营销软件、网站建设、罗庄网站维护、网站推广。http连接并发监测
在某地的双向系统中,两台服务器有一个httpd服务器,通过负载均衡承担4万多的机顶盒的首页面访问。因此,需要监测每台服务器的http连接数量。对并发量关注一段时期,如果并发量在设置的值之内,则不需要进行并发量的调整,而如果并发量比较大的话,则需要进行调整httpd参数。
http的连接数量可以通过ps -ef | grep httpd | wc -l来获取。Centos5版本默认的文件打开数量为1024。对/etc/httpd/conf/httpd.conf进行参数调整,使httpd可以承担1000个并发:
查询默认的服务方式:
# httpd -l
Compiled in modules:
core.c
prefork.c
http_core.c
mod_so.c
#
默认的服务方式为prefork,调整/etc/httpd/conf/httpd.conf参数(具体含义可到网上查找):
StartServers 10
MinSpareServers 50
MaxSpareServers 100
ServerLimit 3000
MaxClients 3000
MaxRequestsPerChild 10000
重启httpd后,进行并发测试:
ab -n 10000 -c 1000 http://172.16.100.190/index.htm
这里共发送10000个请求,每次发送1000个,也就是每次并发1000个,共分10次发送。
如果是并发2000,则报错:
查询httpd的服务方式为:
ps -ef | grep httpd | wc -l
编写监测脚本:
#!/bin/bash
STATE_OK=0
STATE_WARNING=1
STATE_CRITICAL=2
STATE_UNKNOWN=3
count=`ps -ef | grep httpd | wc -l`
let "count =count-2"
if [ $count -gt 800 ]; then
echo "Critical ! httpd processes is $count!|HttpCounts=$count;600;800;0"
exit $STATE_CRITICAL
elif [ $count -gt 600 ]; then
echo "Warning ! httpd processes is $count!|HttpCounts=$count;600;800;0"
exit $STATE_WARNING
elif [ 600 -gt $count ]; then
echo "Ok ! httpd processes is $count!|HttpCounts=$count;600;800;0"
exit $STATE_OK
else
echo "Unknow"
exit $STATE_UNKNOWN
fi
脚本中echo一行最后添加的“|HttpCounts=$count;600;800;0”是pnp画图所需,否则不能画出图。其中600为预警,800为严重告警。
TIME_WAIT监测
默认配置的httpd,在访问量比较大的话,使用命令:
# netstat -n | awk '/^tcp/ {++S[$NF]} END {for(a in S) print a, S[a]}'
TIME_WAIT=581
ESTABLISHED=1
SYN_RECV=1
就会有大量的time_wait。可以通过调整系统参数得到改善:
http://blog.csdn.net/sunvince/article/details/6622796
http://chembo.iteye.com/blog/1503770
这里,在/etc/sysctl.conf增加以下4个参数:
net.ipv4.tcp_syncookies = 1 //这个参数如果已经添加了的话,就不需要再次添加
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_fin_timeout = 30
然后执行 /sbin/sysctl -p 让参数生效。
继续使用netstat -n | awk '/^tcp/ {++S[$NF]} END {for(a in S) print a, S[a]}',观察到TIME_WAIT=3了。
可以根据下节中监测物理内存的check_mem脚本规范编写监测 TIME_WAIT的脚本:
#more /usr/local/nagios/libexec/check_timewait
#!/bin/bash
#netstat -n | awk '/^tcp/ {++S[$NF]} END {for(a in S) print a, S[a]}'
#TIME_WAIT 641
#ESTABLISHED 1
#SYN_RECV 1
if [ $# != 4 ];then
echo "Usage:$0 -w num1 -c num2"
exit
fi
time_wait=`netstat -n | awk '/^tcp/ {++S[$NF]} END {for(a in S) print a, S[a]}'|grep TIME_WAIT|awk '{print $2}'`
established=`netstat -n | awk '/^tcp/ {++S[$NF]} END {for(a in S) print a, S[a]}'|grep ESTABLISHED|awk '{print $2}'`
syn_recv=`netstat -n | awk '/^tcp/ {++S[$NF]} END {for(a in S) print a, S[a]}'|grep SYN_RECV|awk '{print $2}'`
if [ $time_wait -gt $4 ];then
echo "Critical - TIME_WAIT=$time_wait ESTABLISHED=$established SYN_RECV=$syn_recv|TIME_WAIT=$time_wait;$2;$4;0 ESTABLISHED=$established;;; SYN_RECV=$syn_recv;;;"
exit 2
fi
if [ $time_wait -le $4 -a $time_wait -ge $2 ];then
echo "Warning - TIME_WAIT=$time_wait ESTABLISHED=$established SYN_RECV=$syn_recv |TIME_WAIT=$time_wait;$2;$4;0 ESTABLISHED=$established;;; SYN_RECV=$syn_recv;;;"
exit 1
fi
if [ $time_wait -lt $2 ];then
echo "OK - TIME_WAIT=$time_wait ESTABLISHED=$established SYN_RECV=$syn_recv |TIME_WAIT=$time_wait;$2;$4;0 ESTABLISHED=$established;;; SYN_RECV=$syn_recv;;;"
exit 0
fi
~
路由监测
另外,由于这台机器不能丢失一个默认的路由,否则机顶盒无法获取首页面。默认的路由也可以编写脚本进行监测:
#!/bin/bash
STATE_OK=0
STATE_WARNING=1
STATE_CRITICAL=2
STATE_UNKNOWN=3
default_route=`route |grep default`
if [ "default 172.16.100.1 0.0.0.0 UG 0 0 0 bond0"x = "$default_route"x ]; then
echo "Ok! Default route is \"$default_route\"!|defaultRoute=1;0;0"
exit $STATE_OK
else
echo "Critical! Default route is \"$default_route\"!|defaultRoute=0;0;0"
exit $STATE_CRITICAL
fi
物理内存监测
默认的check_swap为监测虚拟内存,如果要监测物理内存,则可以编写以下脚本:
#cd /usr/local/nagios/libexec
#vi check_mem
#!/bin/bash
#memory
if [ $# != 4 ];then
echo "Usage:$0 -w num1 -c num2"
exit
fi
total_mem=`free -m |grep Mem|awk '{print $2}'`
free_mem=`free -m |grep Mem|awk '{print $4}'`
used_mem=`free -m |grep Mem|awk '{print $3}'`
if [ $free_mem -gt $2 ];then
echo "OK - total memory $total_mem MB used $used_mem MB free $free_mem MB|free_mem=$free_mem;$2;$4;0"
exit 0
fi
if [ $free_mem -ge $4 -a $free_mem -le $1 ];then
echo "Warning - total memory $total_mem MB used $used_mem MB free $free_mem MB|free_mem=$free_mem;$2;$4;0"
exit 1
fi
if [ $free_mem -lt $4 ];then
echo "Critical - total memory $total_mem MB used $used_mem MB free $free_mem MB|free_mem=$free_mem;$2;$4;0"
exit 2
fi
#chown -R nagios.nagios check_mem
#chmod a+x check_mem
#./check_mem -w 200 -c 100 //后面两个参数表示剩余内存容量,单位为兆。
网上还有另外一个监测脚本也可以参考 http://www.yunvn.com/thread-5136-1-5.html :
#script to check real memory usage
# L.Gill 02/05/06 - V.1.0
# ------------------------------------------
# ######## Script Modifications ##########
# ------------------------------------------
# Who When What
# --- ---- ----
# LGill 17/05/06 "$percent" lt 1% fix - sed edits dc result beggining with "."
#
#
#!/bin/bash
USAGE="`basename $0` [-w|--warning]
THRESHOLD_USAGE="WARNING threshold must be greater than CRITICAL: `basename $0` $*"
calc=/tmp/memcalc
percent_free=/tmp/mempercent
critical=""
warning=""
STATE_OK=0
STATE_WARNING=1
STATE_CRITICAL=2
STATE_UNKNOWN=3
# print usage
if [[ $# -lt 4 ]]
then
echo ""
echo "Wrong Syntax: `basename $0` $*"
echo ""
echo "Usage: $USAGE"
echo ""
exit 0
fi
# read input
while [[ $# -gt 0 ]]
do
case "$1" in
-w|--warning)
shift
warning=$1
;;
-c|--critical)
shift
critical=$1
;;
esac
shift
done
# verify input
if [[ $warning -eq $critical || $warning -lt $critical ]]
then
echo ""
echo "$THRESHOLD_USAGE"
echo ""
echo "Usage: $USAGE"
echo ""
exit 0
fi
# Total memory available
total=`free -m | head -2 |tail -1 |gawk '{print $2}'`
# Total memory used
used=`free -m | head -2 |tail -1 |gawk '{print $3}'`
# Calc total minus used
free=`free -m | head -2 |tail -1 |gawk '{print $4+$7}'`
# normal values
#echo "$total"MB total
#echo "$used"MB used
#echo "$free"MB free
# make it into % percent free = ((free mem / total mem) * 100)
echo "5" > $calc # decimal accuracy
echo "k" >> $calc # commit
echo "100" >> $calc # multiply
echo "$free" >> $calc # division integer
echo "$total" >> $calc # division integer
echo "/" >> $calc # division sign
echo "*" >> $calc # multiplication sign
echo "p" >> $calc # print
percent=`/usr/bin/dc $calc|/bin/sed 's/^\./0./'|/usr/bin/tr "." " "|/usr/bin/gawk {'print $1'}`
#percent1=`/usr/bin/dc $calc`
#echo "$percent1"
if [[ "$percent" -le $critical ]]
then
echo "CRITICAL - $free MB ($percent%) Free Memory"
exit 2
fi
if [[ "$percent" -le $warning ]]
then
echo "WARNING - $free MB ($percent%) Free Memory"
exit 1
fi
if [[ "$percent" -gt $warning ]]
then
echo "OK - $free MB ($percent%) Free Memory"
exit 0
fi
用以下命令执行:
# ./check_memory -w 36 -c 10
OK - 185 MB (37%) Free Memory
# ./check_memory -w 37 -c 10
WARNING - 185 MB (37%) Free Memory
# ./check_memory -w 40 -c 37
CRITICAL - 184 MB (37%) Free Memory
#
-w表示低于多少百分比就预警,-c表示低于多少百分比就严重告警
另外有需要云服务器可以了解下创新互联scvps.cn,海内外云服务器15元起步,三天无理由+7*72小时售后在线,公司持有idc许可证,提供“云服务器、裸金属服务器、高防服务器、香港服务器、美国服务器、虚拟主机、免备案服务器”等云主机租用服务以及企业上云的综合解决方案,具有“安全稳定、简单易用、服务可用性高、性价比高”等特点与优势,专为企业上云打造定制,能够满足用户丰富、多元化的应用场景需求。
当前标题:4nagios自定义监测脚本-创新互联
本文网址:http://pwwzsj.com/article/csiehd.html