kubernetes使用cri-o替换docker-创新互联

部署环境

# 操作系统：CentOS Linux release 8.0.1905 (Core)
# kubelet 版本： v1.14.0
# runc版本：v1.0.0-rc9
# crictl 版本：v1.16.1
#crio版本：v1.15.2
#conmon版本：v2.0.1
# cni版本：v0.8.2
# 网络插件： kube-router
#工作目录： /apps
# 二进制文件目录： /usr/bin
# cni 目录：/apps/cni
# 工作节点：win10 on Ubuntu 19.10
# 工作目录：/mnt/g/work/crio
# 节点IP：192.168.2.196
# 节点名：node05

准备所需二进制文件

mkdir -p /mnt/g/work/crio
cd /mnt/g/work/crio
wget https://github.com/opencontainers/runc/releases/download/v1.0.0-rc9/runc.amd64
wget https://github.com/kubernetes-sigs/cri-tools/releases/download/v1.16.1/crictl-v1.16.1-linux-amd64.tar.gz
wget https://github.com/cri-o/cri-o/releases/download/v1.15.2/crio-v1.15.2.tar.gz
wget https://github.com/containernetworking/plugins/releases/download/v0.8.2/cni-plugins-linux-amd64-v0.8.2.tgz
wget https://github.com/containers/conmon/archive/v2.0.1.zip

解压下载文件及编译源码

# conmon 官方不提供二进制下载所以要编译
# 工作节点编译然后分发
sudo apt-get install \
  gcc \
  git \
  libc6-dev \
  libglib2.0-dev \
  pkg-config \
  make \
  unzip \
  runc
# 编译conmon
# 解压conmon 
unzip  v2.0.1.zip
cd conmon-2.0.1
make
# 二进制文件目录 ./bin/conmon
cp -pdr ./bin/conmon ../
rm -rf conmon-2.0.1  v2.0.1.zip 
# 解压cni
mkdir ./cni/bin
cd ./cni/bin
mv ../../cni-plugins-linux-amd64-v0.8.2.tgz ./
tar -xvf cni-plugins-linux-amd64-v0.8.2.tgz
rm -rf cni-plugins-linux-amd64-v0.8.2.tgz
# 回到最上级目录
cd  ../../
# 解压crictl
tar -xvf crictl-v1.16.1-linux-amd64.tar.gz
 rm -f crictl-v1.16.1-linux-amd64.tar.gz
 # 解压crio
 tar -xvf crio-v1.15.2.tar.gz
 cd crio-v1.15.2/bin/
 mv crio-x86_64-static-glibc ../../crio
 rm -rf  crio-v1.15.2  crio-v1.15.2.tar.gz
 # 重命名runc.amd64
 mv runc.amd64 runc
 chmod +x  runc

创建配置文件

cd /mnt/g/work/crio
# 配置cni 测试配置文件 接入kubernetes  集群需要删除此cni 配置文件
 mkdir -p ./etc/cni/net.d
 cat > ./etc/cni/net.d/87-bridge.conflist < ./etc/containers/policy.json < ./etc/containers/registries.conf < ./etc/crio/crio.conf
# 修改生成配置
vim  ./etc/crio/crio.conf
# 取消注释修改存储目录
root = "/apps/lib/containers/storage"
# 取消注释修改容器运行存储目录
runroot = "/apps/run/containers/storage"
# 取消注释修改容器运行时文件打开数
default_ulimits = [
          "nofile=1024000:1024000",
          "nproc=1024000:1024000",
          "core=-1:-1",
]
#修改conmon 路径 默认conmon = "/usr/local/libexec/crio/conmon"
conmon = "/usr/bin/conmon"
# 修改pids_limit 默认1024
pids_limit = 102400
# pause_image 默认pause_image = "k8s.gcr.io/pause:3.1" 由于网络不通所有要修改
pause_image = "docker.io/juestnow/pause-amd64:3.1"
#修改cni 二进制路径
plugin_dirs = [
        "/apps/cni/bin/",
# 创建crictl 配置
cat >./etc/crictl.yaml <./crio.service <

`分发文件`

scp -r crio crictl 192.168.2.196:/usr/local/bin/
scp conmon runc 192.168.2.196:/usr/bin/
# 分发cni
scp -r cni 192.168.2.196:/apps/
# 分发配置文件
scp -r etc 192.168.2.196:/
# 分发启动文件
scp  crio.service 192.168.2.196:/usr/lib/systemd/system/crio.service

`启动crio 安装对应依赖`

dnf -y install  epel-release
dnf install   dnf-utils ipvsadm telnet wget net-tools conntrack ipset jq iptables curl sysstat libseccomp socat nfs-utils fuse fuse-devel  device-mapper
# 启动 crio
systemctl daemon-reload
systemctl enable crio
systemctl start crio
[root@node05 ~]# systemctl status crio
● crio.service - OCI-based implementation of Kubernetes Container Runtime Interface
   Loaded: loaded (/usr/lib/systemd/system/crio.service; enabled; vendor preset: disabled)
   Active: active (running) since Mon 2019-10-28 10:22:14 CST; 10h ago
     Docs: https://github.com/github.com/cri-o/cri-o
  Process: 714 ExecStartPre=/sbin/modprobe overlay (code=exited, status=0/SUCCESS)
  Process: 659 ExecStartPre=/sbin/modprobe br_netfilter (code=exited, status=0/SUCCESS)
 Main PID: 726 (crio)
    Tasks: 17 (limit: 49836)
   Memory: 89.3M
   CGroup: /system.slice/crio.service
           └─726 /usr/local/bin/crio --log-level info
# 创建测试应用
cat > sandbox_config.json <

`配置 kubelet以支持cri-o`

vim /apps/kubernetes/conf/kubelet
----------------------------------------------------------------------------------------------------------------------
KUBELET_OPTS="--bootstrap-kubeconfig=/apps/kubernetes/conf/bootstrap.kubeconfig \
              --fail-swap-on=false \
              --network-plugin=cni --cni-conf-dir=/etc/cni/net.d --cni-bin-dir=/apps/cni/bin \
              --kubeconfig=/apps/kubernetes/conf/kubelet.kubeconfig \
              --address=192.168.2.196 \
              --node-ip=192.168.2.196 \
              --hostname-override=node05 \
              --cluster-dns=10.64.0.2 \
              --cluster-domain=cluster.local \
              --authorization-mode=Webhook \
              --authentication-token-webhook=true \
              --client-ca-file=/apps/kubernetes/ssl/k8s/k8s-ca.pem \
              --rotate-certificates=true \
              --cgroup-driver=cgroupfs \
              --allow-privileged=true \
              --healthz-port=10248 \
              --healthz-bind-address=192.168.2.196 \
              --cert-dir=/apps/kubernetes/ssl \
              --feature-gates=RotateKubeletClientCertificate=true,RotateKubeletServerCertificate=true \
              --node-labels=node-role.kubernetes.io/k8s-node=true \
              --serialize-image-pulls=false \
              --enforce-node-allocatable=pods,kube-reserved,system-reserved \
              --pod-manifest-path=/apps/work/kubernetes/manifests \
              --runtime-cgroups=/systemd/system.slice/kubelet.service \
              --kube-reserved-cgroup=/systemd/system.slice/kubelet.service \
              --system-reserved-cgroup=/systemd/system.slice \
              --root-dir=/apps/work/kubernetes/kubelet \
              --log-dir=/apps/kubernetes/log \
              --alsologtostderr=true \
              --logtostderr=false \
              --anonymous-auth=true \
              --container-log-max-files=10 \
              --container-log-max-size=100Mi \
              --container-runtime=remote \
              --container-runtime-endpoint=unix:///var/run/crio/crio.sock \
              --containerd=unix:///var/run/crio/crio.sock \
              --runtime-request-timeout=15m \
              --image-gc-high-threshold=70 \
              --image-gc-low-threshold=50 \
              --kube-reserved=cpu=500m,memory=512Mi,ephemeral-storage=1Gi \
              --system-reserved=cpu=1000m,memory=1024Mi,ephemeral-storage=1Gi \
              --eviction-hard=memory.available<500Mi,nodefs.available<10% \
              --serialize-image-pulls=false \
              --sync-frequency=30s \
              --resolv-conf=/etc/resolv.conf \
              --pod-infra-container-image=docker.io/juestnow/pause-amd64:3.1 \
              --image-pull-progress-deadline=30s \
              --v=2 \
              --event-burst=30 \
              --event-qps=15 \
              --kube-api-burst=30 \
              --kube-api-qps=15 \
              --max-pods=100 \
              --pods-per-core=10 \
              --read-only-port=0 \
              --volume-plugin-dir=/apps/kubernetes/kubelet-plugins/volume"
---------------------------------------------------------------------------------------------------------------------------------------------
# 修改启动文件kubelet.service
vim /usr/lib/systemd/system/kubelet.service
--------------------------------------------------------------------------------------------------------------------------------------------
[Unit]
Description=Kubernetes Kubelet
After=crio.service
Requires=crio.service

[Service]
ExecStartPre=-/bin/mkdir -p /sys/fs/cgroup/hugetlb/systemd/system.slice/kubelet.service
ExecStartPre=-/bin/mkdir -p /sys/fs/cgroup/blkio/systemd/system.slice/kubelet.service
ExecStartPre=-/bin/mkdir -p /sys/fs/cgroup/cpuset/systemd/system.slice/kubelet.service
ExecStartPre=-/bin/mkdir -p /sys/fs/cgroup/devices/systemd/system.slice/kubelet.service
ExecStartPre=-/bin/mkdir -p /sys/fs/cgroup/net_cls,net_prio/systemd/system.slice/kubelet.service
ExecStartPre=-/bin/mkdir -p /sys/fs/cgroup/perf_event/systemd/system.slice/kubelet.service
ExecStartPre=-/bin/mkdir -p /sys/fs/cgroup/cpu,cpuacct/systemd/system.slice/kubelet.service
ExecStartPre=-/bin/mkdir -p /sys/fs/cgroup/freezer/systemd/system.slice/kubelet.service
ExecStartPre=-/bin/mkdir -p /sys/fs/cgroup/memory/systemd/system.slice/kubelet.service
ExecStartPre=-/bin/mkdir -p /sys/fs/cgroup/pids/systemd/system.slice/kubelet.service
ExecStartPre=-/bin/mkdir -p /sys/fs/cgroup/systemd/systemd/system.slice/kubelet.service
EnvironmentFile=-/apps/kubernetes/conf/kubelet
ExecStart=/apps/kubernetes/bin/kubelet $KUBELET_OPTS
Restart=on-failure
KillMode=process
LimitNOFILE=1024000
LimitNPROC=1024000
LimitCORE=infinity
LimitMEMLOCK=infinity
[Install]
WantedBy=multi-user.target
# 说明在使用docker 时可以不需要创建kubelet.service 目录
# 使用crio 必须手动创建目录
# 配置生效
systemctl daemon-reload
# 启动 crio.service 
systemctl start crio.service
# 启动 kubelet 
systemctl restart kubelet.service
# 创建cni 配置文件10-kuberouter.conflist
cat > /etc/cni/net.d/10-kuberouter.conflist <        CentOS Linux 7 (Core)   3.10.0-1062.1.2.el7.x86_64    docker://19.3.3
nginx-2   Ready    k8s-node     47d     v1.14.0   192.168.2.189           CentOS Linux 7 (Core)   5.1.0-1.el7.elrepo.x86_64     docker://18.9.6
node01    Ready    k8s-master   194d    v1.14.0   192.168.2.253           CentOS Linux 7 (Core)   5.0.7-1.el7.elrepo.x86_64     docker://18.9.4
node02    Ready    k8s-master   194d    v1.14.0   192.168.3.4             CentOS Linux 7 (Core)   5.0.7-1.el7.elrepo.x86_64     docker://18.9.4
node03    Ready    k8s-node     47d     v1.14.0   192.168.2.165           CentOS Linux 7 (Core)   5.1.0-1.el7.elrepo.x86_64     docker://18.9.6
node04    Ready    k8s-node     47d     v1.14.0   192.168.2.167           CentOS Linux 7 (Core)   5.1.14-1.el7.elrepo.x86_64    docker://18.9.6
node05    Ready    k8s-node     5h34m   v1.14.0   192.168.2.196           CentOS Linux 8 (Core)   4.18.0-80.11.2.el8_0.x86_64   cri-o://1.15.2
[root@node05 conf]#  crictl ps
CONTAINER           IMAGE                                                                                                         CREATED             STATE               NAME                ATTEMPT             POD ID
5942e8c161029       docker.io/library/traefik@sha256:9a77d02ad23622cd85e38eec127a85110ad73ba8258d8b457cf17bd3ad1eeef0             3 hours ago         Running             traefik             0                   b03a2afb9dd91
9b23f9bc1d51a       docker.io/juestnow/process-exporter@sha256:8ef99f0488d8ea30770e048b4e4255a0ace7732422f243ab57fede0a003945bf   3 hours ago         Running             process-exporter    1                   7d133f4fba6c2
1e5a5a07676f1       docker.io/prom/node-exporter@sha256:b630fb29d99b3483c73a2a7db5fc01a967392a3d7ad754c8eccf9f4a67e7ee31          3 hours ago         Running             node-exporter       1                   cfa2a3d2b851c
[root@node05 conf]#  crictl pods
POD ID              CREATED             STATE               NAME                      NAMESPACE           ATTEMPT
b03a2afb9dd91       3 hours ago         Ready               traefik-f94cf4494-2n4x5   kube-system         0
cfa2a3d2b851c       3 hours ago         Ready               node-exporter-rmv24       monitoring          1
7d133f4fba6c2       3 hours ago         Ready               process-exporter-hrbcv    monitoring          1
# 容器能正常运行cri-o 替换docker 成功
# kube-router 下载地址 
https://github.com/cloudnativelabs/kube-router/releases/download/v0.3.2/kube-router_0.3.2_linux_amd64.tar.gz

成都创新互联长期为1000+客户提供的网站建设服务，团队从业经验10年，关注不同地域、不同群体，并针对不同对象提供差异化的产品和服务；打造开放共赢平台，与合作伙伴共同营造健康的互联网生态环境。为五华企业提供专业的成都网站设计、做网站，五华网站改版等技术服务。拥有10多年丰富建站经验和众多成功案例,为您定制开发。另外有需要云服务器可以了解下创新互联cdcxhl.cn，海内外云服务器15元起步，三天无理由+7*72小时售后在线，公司持有idc许可证，提供“云服务器、裸金属服务器、高防服务器、香港服务器、美国服务器、虚拟主机、免备案服务器”等云主机租用服务以及企业上云的综合解决方案，具有“安全稳定、简单易用、服务可用性高、性价比高”等特点与优势，专为企业上云打造定制，能够满足用户丰富、多元化的应用场景需求。
                

                分享名称：kubernetes使用cri-o替换docker-创新互联                

                标题URL：http://pwwzsj.com/article/dcopci.html


        
            其他资讯
            
                
                        服务器状态监测keepalived是怎样的
                    

                        如何使用红黑树
                    

                        数据结构哈希表的闭散列基本实现
                    

                        delete属性删除
                    

                        如何部署ADORecordset对象记录集