平武建站

kubernetes中Master节点如何安装与配置-创新互联

这篇文章主要介绍kubernetes中Master节点如何安装与配置，文中介绍的非常详细，具有一定的参考价值，感兴趣的小伙伴们一定要看完！

小店ssl适用于网站、小程序/APP、API接口等需要进行数据传输应用场景，ssl证书未来市场广阔！成为成都创新互联的ssl证书销售渠道，可以享受市场价格4-6折优惠！如果有意向欢迎电话联系或者加微信：028-86922220（备注：SSL证书合作）期待与您的合作！

一：简介
1.kubernetes master节点包含以下组件：kube-apiserver,kube-scheduler和kube-controller-manager。 这三个组件需要部署在同一台机器上。 同时只能有一个kube-scheduler,kube-controller-manager进程处于工作状态，如果运行多个，则需要通过选举产生一个leader.

2.在/etc/kubernetes/ssl目录下，准备好可能用到的证书文件。
admin-key.pem admin.pem ca-key.pem ca.pem kube-proxy-key.pem，kube-proxy.pem kubernetes-key.pem kubernetes.pem

3.下载安装文件 wget https://storage.googleapis.com/kubernetes-release/release/v1.8.5/kubernetes-server-linux-amd64.tar.gz
tar -xzvf kubernetes-server-linux-amd64.tar.gz
cd kubernetes
tar -xzvf kubernetes-src.tar.gz
复制二进制文件到指定目录
cp -r server/bin/{kube-apiserver,kube-controller-manager,kube-scheduler,kubectl,kube-proxy,kubelet} /usrbin/

二：配置和启动 kube-apiserver

1.service配置文件 /usr/lib/systemd/system/kube-apiserver.service



点击(此处)折叠或打开

  1. [Unit]


  2. Description=Kubernetes API Service


  3. Documentation=https://github.com/GoogleCloudPlatform/kubernetes


  4. After=network.target


  5. After=etcd.service



  7. [Service]


  8. EnvironmentFile=-/etc/kubernetes/config


  9. EnvironmentFile=-/etc/kubernetes/apiserver


  10. ExecStart=/usr/bin/kube-apiserver \


  11.          $KUBE_LOGTOSTDERR \


  12.          $KUBE_LOG_LEVEL \


  13.          $KUBE_ETCD_SERVERS \


  14.          $KUBE_API_ADDRESS \


  15.          $KUBE_API_PORT \


  16.          $KUBELET_PORT \


  17.          $KUBE_ALLOW_PRIV \


  18.          $KUBE_SERVICE_ADDRESSES \


  19.          $KUBE_ADMISSION_CONTROL \


  20.          $KUBE_API_ARGS


  21. Restart=on-failure


  22. Type=notify


  23. LimitNOFILE=65536



  25. [Install]


  26. WantedBy=multi-user.target

2.配置文件/etc/kubernetes/config



点击(此处)折叠或打开

  1. ###


  2. # kubernetes system config


  3. #


  4. # The following values are used to configure various aspects of all


  5. # kubernetes services, including


  6. #


  7. # kube-apiserver.service


  8. # kube-controller-manager.service


  9. # kube-scheduler.service


  10. # kubelet.service


  11. # kube-proxy.service



  13. # logging to stderr means we get it in the systemd journal


  14. KUBE_LOGTOSTDERR="--logtostderr=true"



  16. # journal message level, 0 is debug


  17. KUBE_LOG_LEVEL="--v=0"



  19. # Should this cluster be allowed to run privileged docker containers


  20. KUBE_ALLOW_PRIV="--allow-privileged=true"



  22. # How the controller-manager, scheduler, and proxy find the apiserver


  23. KUBE_MASTER="--master=http://10.116.137.196:8080"

该配置文件同时被kube-apiserver、kube-controller-manager、kubescheduler、kubelet、kube-proxy使用。

3.配置文件 /etc/kubernetes/apiserver



点击(此处)折叠或打开

  1. ###


  2. ## kubernetes system config


  3. ##


  4. ## The following values are used to configure the kube-apiserver


  5. ##


  6. #


  7. ## The address on the local server to listen to.


  8. KUBE_API_ADDRESS="--advertise-address=10.116.137.196 --bind-address=10.116.137.196 --insecure-bind-address=10.116.137.196"


  9. #


  10. ## The port on the local server to listen on.


  11. #KUBE_API_PORT="--port=8080"


  12. #


  13. ## Port minions listen on


  14. #KUBELET_PORT="--kubelet-port=10250"


  15. #


  16. ## Comma separated list of nodes in the etcd cluster


  17. KUBE_ETCD_SERVERS="--etcd-servers=https://10.116.137.196:2379,https://10.116.82.28:2379,https://10.116.36.57:2379"


  18. #


  19. ## Address range to use for services


  20. KUBE_SERVICE_ADDRESSES="--service-cluster-ip-range=10.254.0.0/16"


  21. #


  22. ## default admission control policies


  23. KUBE_ADMISSION_CONTROL="--admission-control=ServiceAccount,NamespaceLifecycle,NamespaceExists,LimitRanger,ResourceQuota"


  24. #


  25. ## Add your own!


  26. KUBE_API_ARGS="--authorization-mode=RBAC --runtime-config=rbac.authorization.k8s.io/v1beta1 --kubelet-https=true --experimental-bootstrap-token-auth --token-auth-file=/etc/kubernetes/token.csv --service-node-port-range=30000-32767 --tls-cert-file=/etc/kubernetes/ssl/kubernetes.pem --tls-private-key-file=/etc/kubernetes/ssl/kubernetes-key.pem --client-ca-file=/etc/kubernetes/ssl/ca.pem --service-account-key-file=/etc/kubernetes/ssl/ca-key.pem --etcd-cafile=/etc/kubernetes/ssl/ca.pem --etcd-certfile=/etc/kubernetes/ssl/kubernetes.pem --etcd-keyfile=/etc/kubernetes/ssl/kubernetes-key.pem --enable-swagger-ui=true --apiserver-count=1 --audit-log-maxage=30 --audit-log-maxbackup=3 --audit-log-maxsize=100 --audit-log-path=/var/lib/audit.log --event-ttl=1h"

a. --authorization-mode=RBAC 指定在安全端口使用 RBAC 授权模式，拒绝未通过授权的请求；

b. kube-scheduler、kube-controller-manager 一般和 kube-apiserver 部署在同一台机器上，它们使非安全端口和 kube-apiserver通信;
kubelet、kube-proxy、kubectl 部署在其它 Node 节点上，如果通过安全端?访问 kube-apiserver，则必须先通过 TLS 证书认证，再通过
RBAC 授权；

c. kube-proxy、kubectl 通过在使?的证书?指定相关的 User、Group来达到通过 RBAC 授权的?的；

d. 如果使用了 kubelet TLS Boostrap 机制，则不能再指定 --kubeletcertificate-authority 、 --kubelet-client-certificate 和 --kubelet-client-key 选项，否则后续 kube-apiserver 校验 kubelet 证
书时出现 ”x509: certificate signed by unknown authority“ 错误；

e. --admission-control 值必须包含 ServiceAccount ；

f. --bind-address 不能为 127.0.0.1 ；

g. runtime-config 配置为 rbac.authorization.k8s.io/v1beta1 ，表示运行时的apiVersion；

h. --service-cluster-ip-range 指定 Service Cluster IP 地址段，该地址段不能路由可达；

i. 缺省情况下 kubernetes 对象保存在 etcd /registry 路径下，可以通过 --etcd-prefix 参数进行调整；

4.启动kube-apiserver

systemctl daemon-reload
systemctl enable kube-apiserver
systemctl start kube-apiserver
systemctl status kube-apiserver

三：配置和启动 kube-controller-manager
1. 服务文件/usr/lib/systemd/system/kube-controller-manager.service



点击(此处)折叠或打开

  1. [Unit]


  2. Description=Kubernetes Controller Manager


  3. Documentation=https://github.com/GoogleCloudPlatform/kubernetes



  5. [Service]


  6. EnvironmentFile=-/etc/kubernetes/config


  7. EnvironmentFile=-/etc/kubernetes/controller-manager


  8. ExecStart=/usr/bin/kube-controller-manager \


  9.          $KUBE_LOGTOSTDERR \


  10.          $KUBE_LOG_LEVEL \


  11.          $KUBE_MASTER \


  12.          $KUBE_CONTROLLER_MANAGER_ARGS


  13. Restart=on-failure


  14. LimitNOFILE=65536


  15. [Install]


  16. WantedBy=multi-user.target

2.配置文件 /etc/kubernetes/controller-manager



点击(此处)折叠或打开

  1. ###


  2. # The following values are used to configure the kubernetes controller-manager


  3. # defaults from config and apiserver should be adequate


  4. # Add your own!


  5. KUBE_CONTROLLER_MANAGER_ARGS="--address=127.0.0.1 --service-cluster-ip-range=10.254.0.0/16 --cluster-name=kubernetes --cluster-signing-cert-file=/etc/kubernetes/ssl/ca.pem --cluster-signing-key-file=/etc/kubernetes/ssl/ca-key.pem --service-account-private-key-file=/etc/kubernetes/ssl/ca-key.pem --root-ca-file=/etc/kubernetes/ssl/ca.pem --leader-elect=true"

a. --service-cluster-ip-range 参数指定 Cluster 中 Service 的CIDR范围，该?络在各 Node 间必须路由不可达，必须和 kube-apiserver中的参数一致；

b. --cluster-signing-* 指定的证书和私钥文件用来签名为 TLSBootStrap 创建的证书和私钥；

c. --root-ca-file 用来对 kube-apiserver 证书进行校验，指定该参数后，才会在Pod 容器的 ServiceAccount 中放置该 CA 证书文件；

d. --address 值必须为 127.0.0.1 ，因为当前 kube-apiserver 期望scheduler 和 controller-manager 在同一台机器

3.启动 kube-controller-manager
systemctl daemon-reload
systemctl enable kube-controller-manager
systemctl start kube-controller-manager

四：配置和启动 kube-scheduler
1. 服务文件/usr/lib/systemd/system/kube-scheduler.service



点击(此处)折叠或打开

  1. [Unit]


  2. Description=Kubernetes Scheduler Plugin


  3. Documentation=https://github.com/GoogleCloudPlatform/kubernetes



  5. [Service]


  6. EnvironmentFile=-/etc/kubernetes/config


  7. EnvironmentFile=-/etc/kubernetes/scheduler


  8. ExecStart=/usr/bin/kube-scheduler \


  9.     $KUBE_LOGTOSTDERR \


  10.     $KUBE_LOG_LEVEL \


  11.     $KUBE_MASTER \


  12.     $KUBE_SCHEDULER_ARGS


  13. Restart=on-failure


  14. LimitNOFILE=65536



  16. [Install]


  17. WantedBy=multi-user.target

2. 配置文件/etc/kubernetes/scheduler



点击(此处)折叠或打开

  1. ###


  2. # kubernetes scheduler config


  3. # default config should be adequate


  4. # Add your own!


  5. KUBE_SCHEDULER_ARGS="--leader-elect=true --address=127.0.0.1"

3.启动 kube-scheduler
systemctl daemon-reload
systemctl enable kube-scheduler
systemctl start kube-scheduler

五：验证 master 节点功能
kubernetes中Master节点如何安装与配置


以上是“kubernetes中Master节点如何安装与配置”这篇文章的所有内容，感谢各位的阅读！希望分享的内容对大家有帮助，更多相关知识，欢迎关注创新互联行业资讯频道！


名称栏目：kubernetes中Master节点如何安装与配置-创新互联
浏览地址：http://pwwzsj.com/article/dohpjc.html

其他资讯