linux或android怎么添加文件系统的属性接口
这篇文章主要介绍“linux或android怎么添加文件系统的属性接口”的相关知识，小编通过实际案例向大家展示操作过程，操作方法简单快捷，实用性强，希望这篇“linux或android怎么添加文件系统的属性接口”文章能帮助大家解决问题。
十余年专注建站、设计、互联网产品按需设计网站服务，业务涵盖品牌网站设计、商城网站建设、小程序制作、软件系统开发、app软件开发公司等。凭借多年丰富的经验，我们会仔细了解每个客户的需求而做出多方面的分析、设计、整合，为客户设计出具风格及创意性的商业解决方案，创新互联公司更提供一系列网站制作和网站推广的服务，以推动各中小企业全面信息数字化，并利用创新技术帮助各行业提升企业形象和运营效率。
第一种：
1、添加关键头文件：
#include#include #include #include #include #include
2、在已经存在驱动文件中搜索"device_attr"关键字，如果存在，直接参考已经存在的方法添加一个即可，如下：
unsigned int gpio134_otgid = 134; //定义全局变量 static unsigned int otgid_status = 1; …
3、定义文件系统的读写函数：
//add zhaojr gpio134 control otg id for host or device mode
static ssize_t setotgid_store(struct device *dev, struct device_attribute *attr,const char *buf, size_t count)
{
unsigned int ret=0;
pr_err("%s: \n", __func__);
//ret = kstrtoint(buf, 10, &otgid_status);
ret = kstrtouint(buf, 10, &otgid_status);
//sscanf(buf, "%lu", &otgid_status);
if (ret < 0){
pr_err("%s::kstrtouint() failed \n", __func__);
}
//sscanf(buf, "%d", &otgid_status);
pr_err("%s: otgid_status=%d \n", __func__,otgid_status);
if(otgid_status > 0){
gpio_set_value(gpio134_otgid, 1);
}else{
gpio_set_value(gpio134_otgid, 0);
}
return count;
}
static ssize_t setotgid_show(struct device *dev,struct device_attribute *attr, char *buf)
{
pr_err("%s: \n", __func__);
return sprintf(buf, "%d\n",otgid_status);
}
//static device_attr_rw(setotgid);
/*struct device_attribute dev_attr_setotgid = {
.attr = {.name ="setotgid",
.mode = 0664},
.show = setotgid_show,
.store = setotgid_store,
};*/
//setotgid的一致性，第一个参数setotgid和setotgid_show、setotgid_store前钻必须保持一致
static device_attr(setotgid, 0664, setotgid_show, setotgid_store);
//end zhaojr add
static struct device_attribute *android_usb_attributes[] = {
&dev_attr_state,
&dev_attr_setotgid, //setotgid跟device_attr定义的name必须保持一致
null
};4、在probe()函数中定义针对具体gpio管脚的请求和初始化
static int mdss_mdp_probe(struct platform_device *pdev)
{
....................................................................................
//zhaojr add for gpio134 to usb host or device mode
ret_status=gpio_request(gpio134_otgid, "gpio134-otgid");
if(ret_status<0){
pr_err("usb gadget configfs %s::gpio134_otgid gpio_request failed\n",__func__);
}
pr_err("android_device_create()::gpio134_otgid gpio_request ok\n");
gpio_direction_output(gpio134_otgid,1);
if(otgid_status > 0){ //有自定义初始化状态就添加上这个判断，没有就不需要添加if else操作
pr_err("%s-gpio134_otgid pin set 1\n", __func__);
gpio_set_value(gpio134_otgid, 1);
//msleep(5);
}else{
pr_err("%s-gpio134_otgid pin set 0\n", __func__);
gpio_set_value(gpio134_otgid, 0);
//msleep(5);
}
//end zhaojr add
................................................................
}5、在remove()函数中添加资源的释放
static int mdss_mdp_remove(struct platform_device *pdev)
{
struct mdss_data_type *mdata = platform_get_drvdata(pdev);
if (!mdata)
return -enodev;
pr_err("%s\n", __func__);
gpio_free(gpio134_otgid); //zhaojr add free gpio otgid pin
........................................................
}第二种方法：
在要添加驱动文件中没有搜索"device_attr"关键字的情况，如添加音频功放打开和关闭的控制接口：
1、添加关键头文件：
#include#include #include #include #include #include
2、定义全局变量和定义打开和关闭的接口并组织属性数组：
// add zhaojr gpio63 for close or speaker pa enable
struct kobject *spk_pa_kobj = null;
unsigned int gpio63_spk_pa_gpio; //for speaker pa ic enable
//extern unsigned int gpio63_spk_pa_gpio;
static unsigned int spkpa_gpio_enable = 0;
static ssize_t spkpaon_store(struct device *dev, struct device_attribute *attr,const char *buf, size_t count)
{
unsigned int ret=0;
//ret = kstrtoint(buf, 10, &backlight_enable);
ret = kstrtouint(buf, 10, &spkpa_gpio_enable);
if (ret < 0){
pr_err("%s::kstrtouint() failed \n", __func__);
}
pr_err("%s: spkpa_gpio_enable=%d \n", __func__,spkpa_gpio_enable);
if(spkpa_gpio_enable > 0){
//gpio_set_value(gpio63_spk_pa_gpio, 1);
pr_err("%s: gpio_set_value gpio63 speaker pa enable \n", __func__);
//功放打开的时序
gpio_set_value(gpio63_spk_pa_gpio,0);
udelay(8);
gpio_set_value(gpio63_spk_pa_gpio,1);
udelay(8);
gpio_set_value(gpio63_spk_pa_gpio,0);
udelay(8);
gpio_set_value(gpio63_spk_pa_gpio,1);
//sdm660_cdc->ext_spk_pa_set = true;
}else{
pr_err("%s: gpio_set_value gpio63 speaker pa disable \n", __func__);
//功放关闭的时序
gpio_set_value(gpio63_spk_pa_gpio,0);
udelay(600);
//sdm660_cdc->ext_spk_pa_set = false;
}
return count;
}
static ssize_t spkpaon_show(struct device *dev,struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%d\n",spkpa_gpio_enable);
}
static device_attr(spkpaon, 0664, spkpaon_show, spkpaon_store);
static struct attribute *spkpa_attributes[] = {
&dev_attr_spkpaon.attr,
null
};
static const struct attribute_group apkpa_attr_group = {
.attrs = spkpa_attributes,
null
};
//end zhaojr add3、在probe()函数中添加文件系统属性接口的注册：
在注册的时候并不需要对功放进行初始化，所以probe()函数中并没有对sdm660_cdc->spk_pa_gpio(gpio63)，只操作了请求。具体的请求操作请参考：msm8953 audio部分的ear和speaker输出的声音配置中的音频部分的
vendor/qcom/opensource/audio-kernel/asoc/codecs/sdm660_cdc/msm-analog-cdc.c文件操作
static int msm_anlg_cdc_probe(struct platform_device *pdev)
{
int ret = 0;
struct sdm660_cdc_priv *sdm660_cdc = null;
struct sdm660_cdc_pdata *pdata;
int adsp_state;
..................................
dev_set_drvdata(&pdev->dev, sdm660_cdc);
//kangting add
sdm660_cdc->spk_pa_gpio = of_get_named_gpio(pdev->dev.of_node, "qcom,speaker-pa", 0);
if (!gpio_is_valid(sdm660_cdc->spk_pa_gpio))
pr_err("%s, sdm660_cdc->spk_pa_gpio not specified\n",__func__);
else{
pr_err("%s, sdm660_cdc->spk_pa_gpio is %d\n",__func__,sdm660_cdc->spk_pa_gpio);
ret = gpio_request(sdm660_cdc->spk_pa_gpio, "spk_pa");
if (ret) {
pr_err("request spk_pa_gpio failed, ret=%d\n",ret);
gpio_free(sdm660_cdc->spk_pa_gpio);
}
}
//kangting end
ret = snd_soc_register_codec(&pdev->dev,
&soc_codec_dev_sdm660_cdc,
msm_anlg_cdc_i2s_dai,
array_size(msm_anlg_cdc_i2s_dai));
if (ret) {
dev_err(&pdev->dev,
"%s:snd_soc_register_codec failed with error %d\n",
__func__, ret);
goto err_supplies;
}
blocking_init_notifier_head(&sdm660_cdc->notifier);
blocking_init_notifier_head(&sdm660_cdc->notifier_mbhc);
//add by zhaojr
gpio63_spk_pa_gpio = sdm660_cdc->spk_pa_gpio; //将设备树种定义的io口号获取进来
spk_pa_kobj = kobject_create_and_add("spk_pa", null); //创建/sys/spk_pa/目录
ret = sysfs_create_group(spk_pa_kobj, &apkpa_attr_group); //创建/sys/class/spk_pa/spkpaon节点
if (ret)
dev_err(&pdev->dev,"%s:sysfs_create_group failed with error\n",__func__);
//end zhaojr add
....................................4、在remove函数中释放资源
static int msm_anlg_cdc_remove(struct platform_device *pdev)
{
struct sdm660_cdc_priv *sdm660_cdc = dev_get_drvdata(&pdev->dev);
struct sdm660_cdc_pdata *pdata = sdm660_cdc->dev->platform_data;
int count;
//add by zhaojr //释放资源
gpio_free(sdm660_cdc->spk_pa_gpio);
kobject_put(spk_pa_kobj); //关键函数
sysfs_remove_group(spk_pa_kobj, &apkpa_attr_group); //关键函数
//end zhaojr add
for (count = 0; count < sdm660_cdc->child_count &&
count < anlg_cdc_child_devices_max; count++)
platform_device_unregister(
sdm660_cdc->pdev_child_devices[count]);
snd_soc_unregister_codec(&pdev->dev);
msm_anlg_cdc_disable_supplies(sdm660_cdc, pdata);
wcd9xxx_spmi_irq_exit();
devm_kfree(&pdev->dev, sdm660_cdc);
return 0;
}关于“linux或android怎么添加文件系统的属性接口”的内容就介绍到这里了，感谢大家的阅读。如果想了解更多行业相关的知识，可以关注创新互联行业资讯频道，小编每天都会为大家更新不同的知识点。
网页题目：linux或android怎么添加文件系统的属性接口
文章地址：http://pwwzsj.com/article/gcjhpd.html
