AIX上使用NFS实现AIX之间文件网络共享
AIX 上使用NFS实现AIX之间文件网络共享
十余年的渑池网站建设经验,针对设计、前端、开发、售后、文案、推广等六对一服务,响应快,48小时及时工作处理。营销型网站的优势是能够根据用户设备显示端的尺寸不同,自动调整渑池建站的显示方式,使网站能够适用不同显示终端,在浏览器中调整网站的宽度,无论在任何一种浏览器上浏览网站,都能展现优雅布局与设计,从而大程度地提升浏览体验。创新互联从事“渑池网站设计”,“渑池网站推广”以来,每个客户项目都认真落实执行。
AIX 可以使用NFS在AIX之间实现类似window共享文件夹功能,在多台aix上安装系统补丁的时候比较有用只需要在一台服务器上FTP上传,其他AIX通过共享访问(注意不要多台一起访问可能会由于I/O繁忙带有问题)
注意:
1. 多台AIX之前在同一个局域网子网段中没有问题,若跨网段请确认网络开通NFS端口
2. 下面我都是用root账户登录操作
3. 要在A,B两端的/etc/hosts里互相都加上彼此的IP地址和hostname(若不用DNS都通过hosts表里name
l 第一部分在AIX服务器A 上面建里要通过NFS共享的目录比如:根目录下/test目录
# ls -l total 8 -rw-r----- 1 root system 543 Jul 24 03:39 temp.txt |
/test目录中存放一个文件temp.txt内容如下,后面可以用这个验证共享成功
# cat temp.txt SBMJOB CMD(STROBJCVN LIB(*ALLUSR)) LOG(4 0 *SECLVL)
S6564E5B 定时任务 DAILY4 HOLD
磁带机中磁带 卷标 001176推入磁带机TAP07
Opt Queue Manager Port HHT 1417
MQM HHT
Opt Queue Manager Port HHT 1414 HHT 1417 |
A机器上运行# smit nfs
先选择Network File System (NFS)
NFS
Move cursor to desired item and press Enter.
Configure TCP/IP (If Not Already Configured) Network File System (NFS) Network Information Service (NIS) Configure Secure NFS & NIS
|
再选择Add a Directory to Exports List(先Change / Show Attributes of an Exported Directory确认目录之前没有被Exported
Network File System (NFS)
Move cursor to desired item and press Enter.
Configure NFS on This System Add a Directory to Exports List Change / Show Attributes of an Exported Directory Remove a Directory from Exports List Add a File System for Mounting Change / Show Attributes of an NFS File System Remove an NFS File System Flush NFS V4 Translation Cache Add NFSv4 File System FSID Options Change / Show NFSv4 File System FSID Options Reset NFSv4 File System FSID Options |
下面画面中* Pathname of directory to export 输入导出目录路径和名称 [/test]
Add a Directory to Exports List
Type or select values in entry fields. Press Enter AFTER making all desired changes.
[TOP] [Entry Fields] * Pathname of directory to export [/test] Anonymous UID [-2] Public filesystem? no * Export directory now, system restart or both both []
|
运行完成之后如下提示
COMMAND STATUS
Command: running stdout: yes stderr: no
Before command completion, additional instructions may appear below.
0513-059 The nfsd Subsystem has been started. Subsystem PID is 5505044. 0513-059 The rpc.mountd Subsystem has been started. Subsystem PID is 7077952. |
l 第二部分在另外一台服务器B上
运行smitty nfs选择Network File System (NFS)
NFS
Move cursor to desired item and press Enter.
Configure TCP/IP (If Not Already Configured) Network File System (NFS) Network Information Service (NIS) Configure Secure NFS & NIS |
B机器上选择Add a File System for Mounting
Network File System (NFS)
Move cursor to desired item and press Enter.
Configure NFS on This System Add a Directory to Exports List Change / Show Attributes of an Exported Directory Remove a Directory from Exports List Add a File System for Mounting Change / Show Attributes of an NFS File System Remove an NFS File System Flush NFS V4 Translation Cache Add NFSv4 File System FSID Options Change / Show NFSv4 File System FSID Options Reset NFSv4 File System FSID Options |
Pathname of mount point 填B机上mount点
Pathname of remote directory填A机上路径
Host where remote directory resides填A机主机名(在A机器上运行hostname获得)
Add a File System for Mounting
Type or select values in entry fields. Press Enter AFTER making all desired changes.
[TOP] [Entry Fields] * Pathname of mount point [/tmp/test/] * Pathname of remote directory [/test] * Host where remote directory resides [svr05427] Mount type name [] * Security method [sys] * Mount now, add entry to /etc/filesystems or both? now * /etc/filesystems entry will mount the directory no on system restart.
|
注意: 要在A,B两端的/etc/hosts里互相都加上彼此的IP地址和hostname
若提示not in hosts database 需要修改B机器上/etc/hosts文件增加A服务器的IP地址和hostname
COMMAND STATUS
Command: failed stdout: yes stderr: no
Before command completion, additional instructions may appear below.
mount: 1831-009 svr05427 not in hosts database mount: 1831- 008 giving up on: svr05427:/test A route to the remote host is not available.
|
若有如下错误可能网络上没有开放NFS需要的端口
COMMAND STATUS
Command: failed stdout: yes stderr: no
Before command completion, additional instructions may appear below.
nfsmnthelp: 1831-019 svr05427: System call error number -1.
mount: 1831- 008 giving up on: svr05427:/test System call error number -1. |
成功之后可以在B机上smit mount中 List all能看到mount上文件验证,并访问共享文件内容确认可以访问
l 卸载
取消在B机上可以用smit umount指定上面B机上mount点可以在B机器上取消该NFS
在A机器上卸载,smit nfs选择Remove a Directory from Exports List 输入路径
Network File System (NFS)
Move cursor to desired item and press Enter.
Configure NFS on This System Add a Directory to Exports List Change / Show Attributes of an Exported Directory Remove a Directory from Exports List Add a File System for Mounting Change / Show Attributes of an NFS File System Remove an NFS File System Flush NFS V4 Translation Cache Add NFSv4 File System FSID Options Change / Show NFSv4 File System FSID Options Reset NFSv4 File System FSID Options |
l 权限
我两台机器都是用root账户访问权限两台都是如下一样
# ls -l total 8 -rw-r----- 1 root system 543 Jul 24 06:10 temp.txt |
l 附录:
l windows端也能访问AIX NFS ,也有建议window访问aix文件系统SAMBA比NFS好
比如:http://www.chinaunix.net/jh/9/503373.html
经常碰到一些客户需要将PC Server的数据定期放到运行AIX操作系统的6000小机的 磁带机上备份,做了几个这样的案例 Share一下:)
1、下载SFU
SFU是微软的一款与UNIX系统进行文件共享的软件 100M左右。可在Windows端模拟NFS Server 或者使 Windows成为NFS Client。他是免费的。下载时需要.net帐户(msn的就行)
2、在Windows端安装SFU软件。选择作为NFS Client。安装时间较长。安装结束后可以在网上邻居中发现新增加了一个叫做SFU的 工作组(好像是这个名字)
在上面点击右键选择添加,将6000的IP地址加入。在6000一端开启NFS服务。刷新后就可看到该服务器了
3、身分认证:在两端建立相同帐号,需要在6000上编辑/etc/hosts文件。将需要访问NFS路径的服务器IP地址与机器名称加入。这是 在PC Server端就可以访问该共享文件夹了。在上面还可进行权限的管理 有兴趣的自己实验吧。
网站名称:AIX上使用NFS实现AIX之间文件网络共享
本文网址:http://pwwzsj.com/article/gogjsp.html