平武建站

junipersrx240cluster内网服务器端口发布到外网配置实例

========================================================================================================================
-----------------------------------------内网地址端口发布到外网步骤-----------------------------------------------------
set security address-book global address IMMQI_PRIVATE 172.22.201.20/32

创新互联专注于企业营销型网站建设、网站重做改版、坡头网站定制设计、自适应品牌网站建设、H5网站设计、商城网站建设、集团公司官网建设、外贸网站建设、高端网站制作、响应式网页设计等建站业务，价格优惠性价比高，为坡头等各大城市提供网站开发制作服务。

步骤一：创建 NAT pool
set security nat destination pool DP_TRUST_IMMQI_10089 address 172.22.201.20/32
set security nat destination pool DP_TRUST_IMMQI_10089 address port 10089

步骤二：创建 NAT Rule
set security nat destination rule-set DNAT_FROM_ISP1 rule ISP1_TCP10089_TO_IMMQI_10089 match destination-address-name WAN3001_241 -----119.145.16.241
set security nat destination rule-set DNAT_FROM_ISP1 rule ISP1_TCP10089_TO_IMMQI_10089 match destination-port 10089
set security nat destination rule-set DNAT_FROM_ISP1 rule ISP1_TCP10089_TO_IMMQI_10089 then destination-nat pool DP_TRUST_IMMQI_10089

步骤三：创建放行端口及协议类型
set applications application tcp-10089 protocol tcp
set applications application tcp-10089 destination-port 10089
set applications application tcp-10090 protocol tcp
set applications application tcp-10090 destination-port 10090

步骤四：创建区域策略，并具体匹配源地址和目标地址端口
set security policies from-zone ISP1 to-zone trust policy P_IMMQI_80_9998 match source-address any
set security policies from-zone ISP1 to-zone trust policy P_IMMQI_80_9998 match destination-address IMMQI_PRIVATE
set security policies from-zone ISP1 to-zone trust policy P_IMMQI_80_9998 match application tcp-80
set security policies from-zone ISP1 to-zone trust policy P_IMMQI_80_9998 match application tcp-9998
set security policies from-zone ISP1 to-zone trust policy P_IMMQI_80_9998 match application tcp-10089
set security policies from-zone ISP1 to-zone trust policy P_IMMQI_80_9998 then permit
set security policies from-zone ISP1 to-zone trust policy P_IMMQI_80_9998 then log session-init
set security policies from-zone ISP1 to-zone trust policy P_IMMQI_80_9998 then log session-close

步骤五：如果新建协议，则需要调整策略优先级
insert security policies from-zone Design to-zone trust policy RM-201_84-Cost-Lectra before policy DENY ----新增加策略需要检查是否需要修改策略优先级

set security address-book global address QI_PRIVATE 172.22.201.19/32

正式环境

set security nat destination pool DP_TRUST_IQCSAP_10090 address 172.22.201.19/32
set security nat destination pool DP_TRUST_IQCSAP_10090 address port 10089

ISP1电信线路

set security nat destination rule-set DNAT_FROM_ISP1 rule ISP1_TO_TRUST_IQCSAP_10090 match destination-address-name WAN3001_241
set security nat destination rule-set DNAT_FROM_ISP1 rule ISP1_TO_TRUST_IQCSAP_10090 match destination-port 10090
set security nat destination rule-set DNAT_FROM_ISP1 rule ISP1_TO_TRUST_IQCSAP_10090 then destination-nat pool DP_TRUST_IQCSAP_10090

set security policies from-zone ISP1 to-zone trust policy P_IQCSAP_10090 match source-address any
set security policies from-zone ISP1 to-zone trust policy P_IQCSAP_10090 match destination-address QI_PRIVATE
set security policies from-zone ISP1 to-zone trust policy P_IQCSAP_10090 match application tcp-10089
set security policies from-zone ISP1 to-zone trust policy P_IQCSAP_10090 then permit
set security policies from-zone ISP1 to-zone trust policy P_IQCSAP_10090 then log session-init
set security policies from-zone ISP1 to-zone trust policy P_IQCSAP_10090 then log session-close
set security policies from-zone ISP1 to-zone trust policy P_IQCSAP_10090 then count

ISP6 联通线路

set security nat destination rule-set DNAT_FROM_ISP6 rule ISP6_TO_TRUST_IQCSAP_10090 match destination-address-name WAN3006_165
set security nat destination rule-set DNAT_FROM_ISP6 rule ISP6_TO_TRUST_IQCSAP_10090 match destination-port 10090
set security nat destination rule-set DNAT_FROM_ISP6 rule ISP6_TO_TRUST_IQCSAP_10090 then destination-nat pool DP_TRUST_IQCSAP_10090

set security policies from-zone ISP6 to-zone trust policy P_IQCSAP_10090 match source-address any
set security policies from-zone ISP6 to-zone trust policy P_IQCSAP_10090 match destination-address QI_PRIVATE
set security policies from-zone ISP6 to-zone trust policy P_IQCSAP_10090 match application tcp-10089
set security policies from-zone ISP6 to-zone trust policy P_IQCSAP_10090 then permit
set security policies from-zone ISP6 to-zone trust policy P_IQCSAP_10090 then log session-init
set security policies from-zone ISP6 to-zone trust policy P_IQCSAP_10090 then log session-close
set security policies from-zone ISP6 to-zone trust policy P_IQCSAP_10090 then count

insert security policies from-zone ISP6 to-zone trust policy P_IQCSAP_10090 before policy DENY

验证

{primary:node0}
owenli@cfw01a.cn1> show security flow session nat destination-port 10090
node0:

Session ID: 124271, Policy name: P_IQCSAP_10090/276, State: Backup, Timeout: 14396, Valid
In: 113.X.X.199/57104 --> X.X.X.165/10090;tcp, If: reth25.3006, Pkts: 0, Bytes: 0
Out: 172.22.201.19/10089 --> 113.X.X.199/57104;tcp, If: reth4.500, Pkts: 0, Bytes: 0
Total sessions: 1

node1:

Session ID: 140801, Policy name: P_IQCSAP_10090/276, State: Active, Timeout: 1796, Valid
In: 113.X.X.199/57104 --> X.X.X.165/10090;tcp, If: reth25.3006, Pkts: 2, Bytes: 92
Out: 172.22.201.19/10089 --> 113.X.X.199/57104;tcp, If: reth4.500, Pkts: 1, Bytes: 52
Total sessions: 1


分享文章：junipersrx240cluster内网服务器端口发布到外网配置实例
文章路径：http://pwwzsj.com/article/ihdiog.html

其他资讯