平武建站

DockerSwarm集群创建与可视化管理方法是什么

本篇内容介绍了“Docker Swarm集群创建与可视化管理方法是什么”的有关知识，在实际案例的操作过程中，不少人都会遇到这样的困境，接下来就让小编带领大家学习一下如何处理这些情况吧！希望大家仔细阅读，能够学有所成！

10多年的紫金网站建设经验，针对设计、前端、开发、售后、文案、推广等六对一服务，响应快，48小时及时工作处理。网络营销推广的优势是能够根据用户设备显示端的尺寸不同，自动调整紫金建站的显示方式，使网站能够适用不同显示终端，在浏览器中调整网站的宽度，无论在任何一种浏览器上浏览网站，都能展现优雅布局与设计，从而大程度地提升浏览体验。成都创新互联从事“紫金网站设计”,“紫金网站推广”以来，每个客户项目都认真落实执行。

节点信息：

manager：192.168.220.194

worker1：192.168.220.173

worker2：192.168.220.197

技术栈：

Docker 1.12

Shipyard

swarm

etcd

SwarmOps

rethinkdb

docker-proxy

所需资源包：

Docker Swarm集群创建与可视化管理方法是什么

quick start：

1、安装docker 1.12 （所有节点，内核限制最低centos7）

设置docker1.12 yum源：

cat > /etc/yum.repos.d/docker.repo <<-EOF

[dockerrepo]

name=Docker Repository

baseurl=https://yum.dockerproject.org/repo/experimental/centos/7/

enabled=1

gpgcheck=1

gpgkey=https://yum.dockerproject.org/gpg

EOF

开放端口（manager节点）：

firewall-cmd --zone=public --add-port=2375/tcp --permanent

firewall-cmd --zone=public --add-port=2377/tcp --permanent

firewall-cmd --zone=public --add-port=3375/tcp --permanent

firewall-cmd --zone=public --add-port=4001/tcp --permanent

firewall-cmd --zone=public --add-port=7001/tcp --permanent

firewall-cmd --zone=public --add-port=8080/tcp --permanent

firewall-cmd --zone=public --add-port=10130/tcp --permanent

firewall-cmd --reload

开放端口（worker节点）：

firewall-cmd --zone=public --add-port=2375/tcp --permanent

firewall-cmd --zone=public --add-port=2377/tcp --permanent

firewall-cmd --zone=public --add-port=3375/tcp --permanent

firewall-cmd --reload

安装docker1.12：

yum -y install docker-engine

设置开机自启动：

systemctl enable docker

开启docker服务：

systemctl start docker

设置加速器（国内源）：

curl -sSL https://get.daocloud.io/daotools/set_mirror.sh | sh -s http://e80d24c6.m.daocloud.io

重启docker服务：

systemctl restart docker

初始化swarm集群：

docker swarm init

输出信息如下：

Docker Swarm集群创建与可视化管理方法是什么

Swarm initialized: current node (9r76p77projw3olxbmzmdfura) is now a manager.

To add a worker to this swarm, run the following command:

docker swarm join \

--token SWMTKN-1-1m8h611662w4s79nus0az57fucoypykm199b6lc88hr6mu7zeb-1b7ks1s15o2d5xssllqq8u4no \

192.168.220.143:2377

To add a manager to this swarm, run 'docker swarm join-token manager' and follow the instructions.

worker节点加入swarm集群：

docker swarm join --token SWMTKN-1-1m8h611662w4s79nus0az57fucoypykm199b6lc88hr6mu7zeb-1b7ks1s15o2d5xssllqq8u4no 192.168.220.143:2377

输出信息如下：

Docker Swarm集群创建与可视化管理方法是什么

This node joined a swarm as a worker.

查看swarm节点：

docker node ls

输出信息如下：

Docker Swarm集群创建与可视化管理方法是什么

ID HOSTNAME STATUS AVAILABILITY MANAGER STATUS

9r76p77projw3olxbmzmdfura * DockerH1 Ready Active Leader

athdt83y3sxw6oo8sp7tnnmh4 DockerH1 Ready Active

查看master节点token：

1、添加manager节点：

docker swarm join-token manager

2、添加worker节点：

docker swarm join-token worker

输出信息如下：

Docker Swarm集群创建与可视化管理方法是什么

To add a manager to this swarm, run the following command:

docker swarm join \

--token SWMTKN-1-1m8h611662w4s79nus0az57fucoypykm199b6lc88hr6mu7zeb-3knrcvyaj6uz3df7jkm13w0iu \

192.168.220.143:2377

To add a worker to this swarm, run the following command:

docker swarm join \

--token SWMTKN-1-1m8h611662w4s79nus0az57fucoypykm199b6lc88hr6mu7zeb-1b7ks1s15o2d5xssllqq8u4no \

192.168.220.143:2377

节点退出swarm集群：

docker swarm leave

2、安装Shipyard集群管理服务：

导入启动文件：

docker.sh

文件内容：

【docker.sh】

--------------------------------------------------------------------------------------------------------

#!/bin/bash

if [ "$1" != "" ] && [ "$1" = "-h" ]; then

echo "Shipyard Deploy uses the following environment variables:"

echo " ACTION: this is the action to use (deploy, upgrade, node, remove)"

echo " DISCOVERY: discovery system used by Swarm (only if using 'node' action)"

echo " IMAGE: this overrides the default Shipyard image"

echo " PREFIX: prefix for container names"

echo " SHIPYARD_ARGS: these are passed to the Shipyard controller container as controller args"

echo " TLS_CERT_PATH: path to certs to enable TLS for Shipyard"

echo " PORT: specify the listen port for the controller (default: 8080)"

echo " IP: specify the address at which the controller or node will be available (default: eth0 ip)"

echo " PROXY_PORT: port to run docker proxy (default: 2375)"

exit 1

fi

if [ -z "`which docker`" ]; then

echo "You must have the Docker CLI installed on your \$PATH"

echo " See http://docs.docker.com for details"

exit 1

fi

ACTION=${ACTION:-deploy}

IMAGE=${IMAGE:-shipyard/shipyard:latest}

PREFIX=${PREFIX:-shipyard}

SHIPYARD_ARGS=${SHIPYARD_ARGS:-""}

TLS_CERT_PATH=${TLS_CERT_PATH:-}

CERT_PATH="/etc/shipyard"

PROXY_PORT=${PROXY_PORT:-2375}

SWARM_PORT=3375

SHIPYARD_PROTOCOL=http

SHIPYARD_PORT=${PORT:-8080}

SHIPYARD_IP=${IP}

DISCOVERY_BACKEND=etcd

DISCOVERY_PORT=4001

DISCOVERY_PEER_PORT=7001

ENABLE_TLS=0

CERT_FINGERPRINT=""

LOCAL_CA_CERT=""

LOCAL_SSL_CERT=""

LOCAL_SSL_KEY=""

LOCAL_SSL_CLIENT_CERT=""

LOCAL_SSL_CLIENT_KEY=""

SSL_CA_CERT=""

SSL_CERT=""

SSL_KEY=""

SSL_CLIENT_CERT=""

SSL_CLIENT_KEY=""

show_cert_help() {

echo "To use TLS in Shipyard, you must have existing certificates."

echo "The certs must be named ca.pem, server.pem, server-key.pem, cert.pem and key.pem"

echo "If you need to generate certificates, see https://github.com/ehazlett/certm for examples."

}

check_certs() {

if [ -z "$TLS_CERT_PATH" ]; then

return

fi

if [ ! -e $TLS_CERT_PATH ]; then

echo "Error: unable to find certificates in $TLS_CERT_PATH"

show_cert_help

exit 1

fi

if [ "$PROXY_PORT" = "2375" ]; then

PROXY_PORT=2376

fi

SWARM_PORT=3376

SHIPYARD_PROTOCOL=https

LOCAL_SSL_CA_CERT="$TLS_CERT_PATH/ca.pem"

LOCAL_SSL_CERT="$TLS_CERT_PATH/server.pem"

LOCAL_SSL_KEY="$TLS_CERT_PATH/server-key.pem"

LOCAL_SSL_CLIENT_CERT="$TLS_CERT_PATH/cert.pem"

LOCAL_SSL_CLIENT_KEY="$TLS_CERT_PATH/key.pem"

SSL_CA_CERT="$CERT_PATH/ca.pem"

SSL_CERT="$CERT_PATH/server.pem"

SSL_KEY="$CERT_PATH/server-key.pem"

SSL_CLIENT_CERT="$CERT_PATH/cert.pem"

SSL_CLIENT_KEY="$CERT_PATH/key.pem"

CERT_FINGERPRINT=$(openssl x509 -noout -in $LOCAL_SSL_CERT -fingerprint -sha256 | awk -F= '{print $2;}')

if [ ! -e $LOCAL_SSL_CA_CERT ] || [ ! -e $LOCAL_SSL_CERT ] || [ ! -e $LOCAL_SSL_KEY ] || [ ! -e $LOCAL_SSL_CLIENT_CERT ] || [ ! -e $LOCAL_SSL_CLIENT_KEY ]; then

echo "Error: unable to find certificates"

show_cert_help

exit 1

fi

ENABLE_TLS=1

}

# container functions

start_certs() {

ID=$(docker run \

-ti \

-d \

--restart=always \

--name $PREFIX-certs \

-v $CERT_PATH \

alpine \

sh)

if [ $ENABLE_TLS = 1 ]; then

docker cp $LOCAL_SSL_CA_CERT $PREFIX-certs:$SSL_CA_CERT

docker cp $LOCAL_SSL_CERT $PREFIX-certs:$SSL_CERT

docker cp $LOCAL_SSL_KEY $PREFIX-certs:$SSL_KEY

docker cp $LOCAL_SSL_CLIENT_CERT $PREFIX-certs:$SSL_CLIENT_CERT

docker cp $LOCAL_SSL_CLIENT_KEY $PREFIX-certs:$SSL_CLIENT_KEY

fi

}

remove_certs() {

docker rm -fv $PREFIX-certs > /dev/null 2>&1

}

get_ip() {

if [ -z "$SHIPYARD_IP" ]; then

SHIPYARD_IP=`docker run --rm --net=host alpine ip route get 8.8.8.8 | awk '{ print $7; }'`

fi

}

start_discovery() {

get_ip

ID=$(docker run \

-ti \

-d \

-p 4001:4001 \

-p 7001:7001 \

--restart=always \

--name $PREFIX-discovery \

microbox/etcd:latest -addr $SHIPYARD_IP:$DISCOVERY_PORT -peer-addr $SHIPYARD_IP:$DISCOVERY_PEER_PORT)

}

remove_discovery() {

docker rm -fv $PREFIX-discovery > /dev/null 2>&1

}

start_rethinkdb() {

ID=$(docker run \

-ti \

-d \

--restart=always \

--name $PREFIX-rethinkdb \

rethinkdb)

}

remove_rethinkdb() {

docker rm -fv $PREFIX-rethinkdb > /dev/null 2>&1

}

start_proxy() {

TLS_OPTS=""

if [ $ENABLE_TLS = 1 ]; then

TLS_OPTS="-e SSL_CA=$SSL_CA_CERT -e SSL_CERT=$SSL_CERT -e SSL_KEY=$SSL_KEY -e SSL_SKIP_VERIFY=1"

fi

# Note: we add SSL_SKIP_VERIFY=1 to skip verification of the client

# certificate in the proxy image. this will pass it to swarm that

# does verify. this helps with performance and avoids certificate issues

# when running through the proxy. ultimately if the cert is invalid

# swarm will fail to return.

ID=$(docker run \

-ti \

-d \

-p $PROXY_PORT:$PROXY_PORT \

--hostname=$HOSTNAME \

--restart=always \

--name $PREFIX-proxy \

-v /var/run/docker.sock:/var/run/docker.sock \

-e PORT=$PROXY_PORT \

--volumes-from=$PREFIX-certs $TLS_OPTS\

shipyard/docker-proxy:latest)

}

remove_proxy() {

docker rm -fv $PREFIX-proxy > /dev/null 2>&1

}

start_swarm_manager() {

get_ip

TLS_OPTS=""

if [ $ENABLE_TLS = 1 ]; then

TLS_OPTS="--tlsverify --tlscacert=$SSL_CA_CERT --tlscert=$SSL_CERT --tlskey=$SSL_KEY"

fi

EXTRA_RUN_OPTS=""

if [ -z "$DISCOVERY" ]; then

DISCOVERY="$DISCOVERY_BACKEND://discovery:$DISCOVERY_PORT"

EXTRA_RUN_OPTS="--link $PREFIX-discovery:discovery"

fi

ID=$(docker run \

-ti \

-d \

--restart=always \

--name $PREFIX-swarm-manager \

--volumes-from=$PREFIX-certs $EXTRA_RUN_OPTS \

swarm:latest \

m --replication --addr $SHIPYARD_IP:$SWARM_PORT --host tcp://0.0.0.0:$SWARM_PORT $TLS_OPTS $DISCOVERY)

}

remove_swarm_manager() {

docker rm -fv $PREFIX-swarm-manager > /dev/null 2>&1

}

start_swarm_agent() {

get_ip

if [ -z "$DISCOVERY" ]; then

DISCOVERY="$DISCOVERY_BACKEND://discovery:$DISCOVERY_PORT"

EXTRA_RUN_OPTS="--link $PREFIX-discovery:discovery"

fi

ID=$(docker run \

-ti \

-d \

--restart=always \

--name $PREFIX-swarm-agent $EXTRA_RUN_OPTS \

swarm:latest \

j --addr $SHIPYARD_IP:$PROXY_PORT $DISCOVERY)

}

remove_swarm_agent() {

docker rm -fv $PREFIX-swarm-agent > /dev/null 2>&1

}

start_controller() {

#-v $CERT_PATH:/etc/docker:ro \

TLS_OPTS=""

if [ $ENABLE_TLS = 1 ]; then

TLS_OPTS="--tls-ca-cert $SSL_CA_CERT --tls-cert=$SSL_CERT --tls-key=$SSL_KEY --shipyard-tls-ca-cert=$SSL_CA_CERT --shipyard-tls-cert=$SSL_CERT --shipyard-tls-key=$SSL_KEY"

fi

ID=$(docker run \

-ti \

-d \

--restart=always \

--name $PREFIX-controller \

--link $PREFIX-rethinkdb:rethinkdb \

--link $PREFIX-swarm-manager:swarm \

-p $SHIPYARD_PORT:$SHIPYARD_PORT \

--volumes-from=$PREFIX-certs \

$IMAGE \

--debug \

server \

--listen :$SHIPYARD_PORT \

-d tcp://swarm:$SWARM_PORT $TLS_OPTS $SHIPYARD_ARGS)

}

wait_for_available() {

set +e

IP=$1

PORT=$2

echo Waiting for Shipyard on $IP:$PORT

docker pull ehazlett/curl > /dev/null 2>&1

TLS_OPTS=""

if [ $ENABLE_TLS = 1 ]; then

TLS_OPTS="-k"

fi

until $(docker run --rm ehazlett/curl --output /dev/null --connect-timeout 1 --silent --head --fail $TLS_OPTS $SHIPYARD_PROTOCOL://$IP:$PORT/ > /dev/null 2>&1); do

printf '.'

sleep 1

done

printf '\n'

}

remove_controller() {

docker rm -fv $PREFIX-controller > /dev/null 2>&1

}

if [ "$ACTION" = "deploy" ]; then

set -e

check_certs

get_ip

echo "Deploying Shipyard"

echo " -> Starting Database"

start_rethinkdb

echo " -> Starting Discovery"

start_discovery

echo " -> Starting Cert Volume"

start_certs

echo " -> Starting Proxy"

start_proxy

echo " -> Starting Swarm Manager"

start_swarm_manager

echo " -> Starting Swarm Agent"

start_swarm_agent

echo " -> Starting Controller"

start_controller

wait_for_available $SHIPYARD_IP $SHIPYARD_PORT

echo "Shipyard available at $SHIPYARD_PROTOCOL://$SHIPYARD_IP:$SHIPYARD_PORT"

if [ $ENABLE_TLS = 1 ] && [ ! -z "$CERT_FINGERPRINT" ]; then

echo "SSL SHA-256 Fingerprint: $CERT_FINGERPRINT"

fi

echo "Username: admin Password: shipyard"

elif [ "$ACTION" = "node" ]; then

set -e

if [ -z "$DISCOVERY" ]; then

echo "You must set the DISCOVERY environment variable"

echo "with the discovery system used with Swarm"

exit 1

fi

check_certs

echo "Adding Node"

echo " -> Starting Cert Volume"

start_certs

echo " -> Starting Proxy"

start_proxy

echo " -> Starting Swarm Manager"

start_swarm_manager $DISCOVERY

echo " -> Starting Swarm Agent"

start_swarm_agent

echo "Node added to Swarm: $SHIPYARD_IP"

elif [ "$ACTION" = "upgrade" ]; then

set -e

check_certs

get_ip

echo "Upgrading Shipyard"

echo " -> Pulling $IMAGE"

docker pull $IMAGE

echo " -> Upgrading Controller"

remove_controller

start_controller

wait_for_available $SHIPYARD_IP $SHIPYARD_PORT

echo "Shipyard controller updated"

elif [ "$ACTION" = "remove" ]; then

# ignore errors

set +e

echo "Removing Shipyard"

echo " -> Removing Database"

remove_rethinkdb

echo " -> Removing Discovery"

remove_discovery

echo " -> Removing Cert Volume"

remove_certs

echo " -> Removing Proxy"

remove_proxy

echo " -> Removing Swarm Agent"

remove_swarm_agent

echo " -> Removing Swarm Manager"

remove_swarm_manager

echo " -> Removing Controller"

remove_controller

echo "Done"

else

echo "Unknown action $ACTION"

exit 1

fi

--------------------------------------------------------------------------------------------------------

加载镜像（manager节点）

docker load < shipyard.tar.gz

docker load < shipyard-docker-proxy.tar.gz

docker load < swarm.tar.gz

docker load < microbox-etcd.tar.gz

docker load < rethinkdb.tar.gz

docker load < alpine.tar.gz

运行以下命令：

bash docker.sh

加载镜像（worker节点）

docker load < shipyard-docker-proxy.tar.gz

docker load < swarm.tar.gz

docker load < alpine.tar.gz

运行以下命令：

export ACTION=node DISCOVERY=etcd://:4001 && bash docker.sh

查看所有节点swarm-manager日志：

docker logs -f shipyard-swarm-manager

显示如下则表示服务启动成功：

Docker Swarm集群创建与可视化管理方法是什么

若出现如下错误：

Docker Swarm集群创建与可视化管理方法是什么

解决方案：（所有节点）

停止docker服务，删除/etc/docker/key.json，启动docker服务

systemctl stop docker.service (所有节点同时进行，即都在删除key.json文件前执行)

rm -rf /etc/docker/key.json (所有节点同时进行，即都在停止docker服务后删除key.json)

systemctl start docker.service (所有节点同时进行，即都在删除key.json文件后执行)

浏览器访问：

http://:8080

Docker Swarm集群创建与可视化管理方法是什么

节点信息：

Docker Swarm集群创建与可视化管理方法是什么

3、安装SwarmOps：

加载SwarmOps镜像：

docker load < swarmops.tar.gz

启动SwarmOps容器：

docker run -tdi --name swarmops --net=host --restart=always swarmops:0.0.2

浏览器访问：

http://:10130

Docker Swarm集群创建与可视化管理方法是什么

“Docker Swarm集群创建与可视化管理方法是什么”的内容就介绍到这里了，感谢大家的阅读。如果想了解更多行业相关的知识可以关注创新互联网站，小编将为大家输出更多高质量的实用文章！


网站标题：DockerSwarm集群创建与可视化管理方法是什么
本文链接：http://pwwzsj.com/article/jceees.html

其他资讯